You’re the Mantel to my Fireplace

Milk and Cookies.
Waves and the Ocean.
French Fries and Ketchup.
Simon and Garfunkel.
Peanut Butter and Jelly.
Fountains and Pennies.
Lauren and Matthew.
Miss Pepper and Chasing Squirrels.
See where I’m going here, people? Some things just go together. 😉

So, you can’t have a fireplace without a good mantelpiece, am I right??

Our family room fireplace has come a loooooong way, my friends. Early on, we knew this was one of our little house’s “problem areas” considering every time it would rain, water would flood in through the firebox.

The Newton Nest_Fireplace Reno_IMG_9394

This is a very early “before” picture…like, before we closed and cleaned the belongings out of the house…but you can see the water damage has rotted the entire mantelpiece.

IMG_6937

Once we tore away the wall, we discovered that the brick fireplace surround had completely separated from the chimney.

As you may remember, we completely rebuilt the wall on which the fireplace sits and we even contemplated cutting our losses and removing the entire thing (chimney and all) during a moment of insanity. But with the help of some professionals, we were able to diagnose the problem, repair the chimney and rebuild the firebox.

With all the brickwork complete, it was starting to look like a proper fireplace again…except we were still missing the crowned jewel, our mantelpiece!

Since our family room is open to the kitchen, we decided to stay with the same simple shaker-style look as with our cabinets. We think it turned out pretty nice:

The Newton Nest_Fireplace Reno_IMG_6923

Bye, wall!

The Newton Nest_Fireplace Reno_IMG_7150 copy

Matthew surveying the scene and contemplating how to remove the very old and very heavy iron stove insert…

The Newton Nest_Fireplace Reno_IMG_7151

…realizing this is not a one-man job.

The Newton Nest_Fireplace Reno_

But that stove didn’t stop him from demo-ing the old brick surround. (The bricks were literally crumbling and disintegrating from the long-term dampness – ick!)

The Newton Nest_Fireplace Reno_IMG_7319

New firebox, flue, surround and hearth!

The Newton Nest_Fireplace Reno_IMG_7635

View from the outside; no more leaking!

The Newton Nest_Fireplace Reno_IMG_9362

Ready for her mantel to arrive!

The Newton Nest_Fireplace Reno_IMG_9390

Ta-daaaaa! She’s back and better than ever!

The Newton Nest_Fireplace Reno_IMG_9393 2

(Sorry about all the junk in the fireplace; I was clearly so taken with our new mantelpiece that I was blind to all the scrap wood and tools! 😂)

The Little Dutch Door That Could

From the very first time we laid eyes on this door, we knew it was a keeper. It couldn’t stay in its original location because – as you know – we removed the wall between the kitchen and garage-turned-family-room, but there was no way we were getting rid of this little beauty! So we decided to make it an exterior door leading from our family room out to our side yard.

Perfect! How hard could it be to convert an interior door to an exterior one? No big deal, right? Wrong. I’ve said this more than once, but It’s always those “simple” little projects that surprise you and turn into total marriage testers (Kidding! But it was not our finest moment. 😉 ).

Besides the overall sanding, stripping and repainting, this sweet little Dutch beauty had to be weather-stripped and water-tested (there’s no overhang above the door, so we had to be sure it was watertight). We set to work adding weather-stripping to the doorframe, but didn’t realize we would also need to seal all the window panes and the split between the top and bottom halves of the door…until we tried the “hose test.” Despite our best weather-stripping efforts, she leaked like a sieve.

I’ll spare you the boring details, but after several trips to Home Depot and failed attempts at a solution (not to mention, lots of wet towels and soggy feelings), we found a small rubber seal, carpet tacks, and a good caulk line did the job.

Installed in her new home!

Proud owners 🙂

Flashback to “before.”

“After” in the new location as an exterior door.

Post (one of many) hose-tests 😦

Working hard to weatherstrip…

…and make this baby watertight.

Whew! I guess it was worth it!

The Last-Minute Window

Our powder room may be small, but it’s got personality! There are so many things we love about this teeny little room, but one of its finest features almost didn’t happen! You may remember from the floorplan redesign that the Nest’s powder room is not an original feature of the house. We decided early on that it would be smart to add a bathroom to the side of the house where all the living spaces are located (duh!). So, we added two little walls (and two pretty doors!) in what we call the office and – voila! – a powder room was born.

Because we re-plumbed the entire house, adding another sink and toilet was relatively easy. The challenge was making this little [water] closet not feel like an afterthought… so we decided to use the other half of the diamond-paned window that was originally in our master bathroom. Great idea, right?? Except: 1.) we only had one of the two window panels restored professionally (to keep in the master bathroom) and 2.) all the window openings had long been decided and windows installed months ago. Ugh! But Lauren we HAD to have this window! So, who did we call? My dad.

Good ol’ Richard Harper already has a recurring role in this story, so why not write one more chapter? Not only did he come to the rescue to restore the other half of the window for us, but he installed it, too! Here’s the proof:

The Newton Nest_Powder Room Window Install_IMG_8386

The master at work! Removing old glazing and stripping the wood.

The Newton Nest_Powder Room window reglazing

Adding new glaze to the window panes. Is there anything this guy can’t do? 🙂

The Newton Nest_Powder Room Window Install_IMG_7764

Making the first cut; no turning back!

The Newton Nest_Powder Room Window Install_IMG_7770

The Newton Nest_Powder Room Window Install_IMG_7802

The Newton Nest_Powder Room Window Install_IMG_7805

We see the light!!!

The Newton Nest_Powder Room Window Install_IMG_7809

Perfect cut!

The Newton Nest_Powder Room Window Install

Installed and trimmed.

I kid you not, adding this little window completely transformed our tiny powder room. Not only are we glad to have the natural light and a view of the Camelia tree in the side yard, but we saved and repurposed the other half of a very special original feature of our Nest. Win-win!

The Newton Nest_Powder Room Window Install_IMG_0311

I mean, can you even imagine this room without a window?

Subway Style

Q:  What’s shiny and white and mudded all over?
A:  Our bathroom tile!

Honk, Honk! The Nest’s bathrooms just got a little touch of subway flair…tile, that is. We chose a simple white, glossy subway tile for the showers because it suits our style and the era of our home. We punched it up a little by using pewter colored grout and adding a simple accent of “pencil tiles” around the perimeter of the shower walls about ¾ of the way up. We also opted to add little niches in each shower to hold shampoo bottles, etc.

The new stuff is fun and, as it turns out, MUCH easier than repairing and restoring the old… but we knew that already, didn’t we? (Cue my parents saying, “Nothing worth having comes easy.”)

The Saga of the Snaggletooth Tiles

Besides being absolutely filthy, the tile in our nest’s bathrooms was in relatively good shape and because we decided to keep the old cast iron bath tubs, too (taking those monsters out would have destroyed the tile around them), we decided that it was a no-brainer to save the original tile. However, there were a few “snaggletooth” holes to fill where we had relocated doorways and some patching needed around the edges of the rooms where we lost a few tiles during the plaster demo.

The only problem: it was impossible to find replacement tiles that would even come close to matching our original ones [insert “they don’t make things like the used to” comment here]. Our tile professional was too chicken to attempt concerned by the only option left: to “harvest” tiles from parts of the floor that would be covered by a vanity, so Matthew and I were forced to try our hand at chiseling out these precious tiles on our own. Thankfully, it was a DIY success not a disaster…although, it definitely tested our marriage a few times. Whew! Glad that’s over.

IMG_9103

Hard at work harvesting tiles.

IMG_9104

Mid-jigsaw puzzle.

IMG_9223

Grinding away at the space for a new marble threshold in the hall bathroom.

IMG_9386

Threshold installed! Not bad for a couple of newbies, right?? (Not as easy as it looks, though…we broke the first one trying to level it.)

IMG_9078

Finally starting to clean up the old tiles!

IMG_9079

Many hours of elbow grease later…good as new!

IMG_8908

Shower niche installed!

IMG_8907

This orange KERDI backing is a moisture-proof “wallpaper”that goes right over the sheetrock before tile installation.

IMG_8985

Tile selection! Classic white subway tiles and pewter grout (we went with the medium gray at bottom).

IMG_8937

Boxes and boxes of tile… here we go!

IMG_9076

Eeeeeeek! Major progress!

IMG_9389

Master shower’s tile is up!

IMG_9388

Hall bath, too!

Tub Transformation

Once the new tile was installed, that pristine white subway tile only accentuated the sad state of our bathtubs. We knew that refinishing them ourselves was not in our wheelhouse, so we called in the professionals. After some research, Matthew found a company called GlazePro in North Carolina that would travel down and – in just two days – completely transform our beat-up bathtubs by scouring, sanding, stripping, patching, and re-glazing. I don’t know much more about the process, but the results are nothing short of miraculous! Take a look-see for yourself:

IMG_9451

The miracle worker in action – scraping, sanding, and patching all the imperfections.

IMG_9456

Patching complete.

IMG_9453

Reglazing in progress… That orange contraption is a portable exhaust system to vent the paint fumes outside. Impressive!

IMG_9454

Can you believe how good this looks??? We were shocked by the transformation. It’s perfect. I think I heard angels singing when I laid eyes on our BRAND NEW old tubs!!

 

No sign of our butler yet…

… but we sure do like his pantry!

If Jeeves were here, I’d ask him if he liked the burnt sienna backsplash in his Butler’s Pantry… something tells me that his answer would be an enthusiastic “no ma’am.”

The "before" picture -- check out those lovely tiles ;)

The “before” picture — check out those lovely tiles 😉


Burnt Sienna! A perfect match.

Burnt Sienna! A perfect match.

Once upon a time, this delightful Crayola color may have been a popular choice, but not anymore! So, we had to bid farewell to all those little orange tiles and give the butler’s pantry a well-deserved makeover.

First things first, I easily chipped away the tiles with a hammer and chisel because the adhesive had lost a lot of its strength over time. Unfortunately, the adhesive kept a very strong bond with the plaster wall between the upper cabinets and the counter top. I tried to chip away at it with every tool I could find, but finally had to resort to our orbital sander and heavy grit sandpaper. It was a dusty, tedious, goggle-fogging job, but I finally got it down to the smooth plaster underneath with only a little damage that required simple patching.

No more tiles!

No more tiles!


Close-up of the stubborn glue left behind.

Close-up of the stubborn glue left behind.


I had to stop every few minutes to wipe out my goggles. Yuck!

I had to stop every few minutes to wipe out my goggles. Yuck!

Next, we discussed what to use for the new counter top that would complement and preserve the charm of the original cabinets. We landed on the idea of “up-cycling” some of the original ceiling joists we cut out to vault the ceilings in the family room and master bedroom. We took this idea to my dad, the forester and master craftsman, to request his expertise and ask for his help to bring the new counter top to life.

Naturally, he had an ever better idea! Our joists were certainly thick and sturdy enough to do the job, but they were made of pine. As mentioned in the floor refinishing post, pine does not stain well and our “vision” was of a darker, richer wood counter top, not raw pine. It just so happened that my father (the forester, master craftsman, AND wood hoarder 🙂 ) had a stash of beautiful walnut left over from when my parents built their kitchen island. Glory! It was just the thing. We are so fortunate that the Harpers were willing to part with such special materials and my dad created a handmade walnut counter top for our butler’s pantry by joining two large pieces together and lovingly applying coat after coat of tongue oil and polyurethane.

Special Delivery!

Special Delivery!


Cutting it down to size.

Cutting it down to size.


Daddy's favorite cutting stance. I believe we have seen this move before ;)

Daddy’s favorite cutting stance. I believe we have seen this move before 😉


Ready to install this beauty!

Ready to install this beauty!


Wrangling it into place.

Wrangling it into place.


Fastening it from underneath, so we don't mar the wood.

Fastening it from underneath, so we don’t mar the wood.


My guys admiring their work...

My guys admiring their work…


My dad also made a matching cove molding to give it the perfect finishing touch!

My dad also made a matching cove molding to give it the perfect finishing touch!

It came out better than I ever expected. In fact, it may just be my favorite part of our nest…

Ta-daaaaahhh! The finished product. Absolutely fantastic.

Ta-daaaaahhh! The finished product. Absolutely fantastic.


...and a very special message hidden on the underside. ;)

…and a very special message hidden on the underside. 😉

A Home for our Dishes…

That’s right! Our dishes now have a cozy little place to call home, because…our cabinets are in! In addition to outfitting our kitchen with a special set of custom cabinets, we also designed built-in storage for the laundry room and our master bathroom. So, our laundry detergent, dirty clothes, and toiletries also have places to call home in our little nest 😉 Our cabinet maker took in lots of questions, sketches, and patiently listened to us jabber on about “our vision” for getting the most out of our space, then he brought our sketches and plans to life with the most beautiful cabinets we’ve ever seen!

We decided on a traditional shaker-style cabinet (with a little added “bead” detail in the door panels) painted Sherwin Williams‘ Pure White to match our trim. For a traditional house like ours, keeping things simple just felt right. And once it all came together, our new cabinets seemed to blend right in with those in the butler’s pantry that are original to the house.

While we have done what we can to maximize the floor plan of our nest, we are still working with – by today’s standards – small spaces, so we put a lot of thought into our designs to use every square inch of space! Here’s what we came up with:

Kitchen Cabinets

This sketch was our first pass at a layout for our kitchen cabinets... and it's pretty much what we went with!

This sketch was our first pass at a layout for our kitchen cabinets… and it’s pretty close to the final design!

Cabinets going in... no island yet!

Cabinets going in… no island yet.

Hello, Kitchen!!

Hello, Kitchen!!

The Newton Nest DIY Kitchen Renovation IMG_9118

The Newton Nest DIY Kitchen Renovation IMG_9117

Putting on the trim.

Putting on the trim.

Prepping for paint... again.

Prepping for paint… again.  (Working late into the night; Matthew’s halo is shining bright! 😉 )

Trim painted and hardware on. It's starting to look pretty good around here :)

Trim painted and hardware on. It’s starting to look pretty good around here 🙂

Door Details

Door Details

Drawer Details

Drawer Details

Special thanks to my Aunt Julie who researched the cabinet hardware for us and found great quality knobs and pulls for a really good price!

Sneak peek at the Butler's Pantry cabinets (I'll do a full post on this soon!) With a fresh coat of paint and new hardware, they blend right in with the new cabinets!

Sneak peek at the Butler’s Pantry cabinets (I’ll do a full post on this transformation soon!) With a fresh coat of paint and new hardware, they blend right in with the new cabinets!

One of my favorite things we did in the kitchen was turning the old ironing board cabinet into a place to keep all our spices. The cabinet maker removed the old built-in ironing board (and relocated it into our laundry room cabinets) and added small shelves just the right size for spice jars. I had our cabinet maker restore the little "trap door" used to store the iron and keep that as part of the cabinet -- so cute!

One of my favorite things we did in the kitchen was repurposing the old ironing board cabinet into the perfect place to keep all our spices. The cabinet maker removed the old fold-down ironing board (and relocated it into our laundry room cabinets), then added small shelves just the right size for spice jars. I had our cabinet maker restore the little “trap door” at the bottom that was used to store the iron. It felt right to keep this little piece of history as part of the cabinet — so cute!

Laundry Room Cabinets

Our sketches:

The Newton Nest DIY Kitchen/Laundry Room Renovation IMG_7622

The Newton Nest DIY Kitchen/Laundry Room Renovation IMG_7615 (1)

The Newton Nest DIY Kitchen/Laundry Room Renovation IMG_7614

The finished product:

Cabinets over the Washer/Dryer.

Cabinets over the Washer/Dryer.

Floor-to-ceiling cabinets for all kinds of laundry things...

Floor-to-ceiling cabinets for all kinds of laundry things…

Like... storage and ironing...

Like… storage and ironing…

...pull-out folding surfaces...

…pull-out folding surfaces…

...and pull-out hampers!

…and laundry hampers!

Master Bathroom Vanity Cabinet

Installed!

Installed!

Hardware on!

Hardware on!

It wouldn’t be The Newton Nest without a couple of older pieces mixed in with the new…

While we’re talking about cabinets, I’d be remiss not to point out two pretty special ones that aren’t custom, but fit pretty seamlessly into our space – if we do say so ourselves! 😉 Both of these found pieces made themselves at home in our hall bathroom, giving it a lot of character and extra storage space!

1.  The Hall Bathroom Vanity

The hall bathroom vanity was just a pedestal sink before we began our renovation. We worked hard to create a more functional space there by moving the doorway and creating an “end cap” wall at the foot of the tub to close in the shower and form a definitive vanity space. This little nook is the perfect spot for a petite vanity, so Matthew and I searched for months for a piece of furniture we could repurpose in this space. After trips all over Greenville and nearby Asheville, and lots of Craigslist surfing, we found ourselves at a little salvage place in Powdersville, SC and stumbled upon a small server that was just the thing! Cute, isn’t she?

The Newton Nest DIY Renovation IMG_9642

2.  The Hall Bathroom Built-in Cabinet

The hall bathroom “built in” was a completely different story. We weren’t looking for something like this at all. In fact, my mom stumbled upon this cute little antique cabinet and had the idea for us to build it into the wall (like a giant medicine cabinet) above the toilet in the hall bath. It took her about a month to convince me to buy this from a little antique store in Seneca, SC, but I’m SO glad she did! It has become an adorable focal point as you enter the hall bath and an essential storage space for toiletry items and guest towels.

Here's the cabinet! This is the picture my mom sent me from the antique store. It's the only one I have showing the cabinet with the legs still attached.

Here’s the cabinet! This is the picture my mom sent me from the antique store. It’s the only one I have showing the cabinet with the legs still attached.

Making this little gem a reality was no easy task though (what else is new??).  Since my mom came across the cabinet back when we were still doing the framing, my dad was able to frame a hole in which the cabinet could be set. Acting like an oversized medicine cabinet, this idea would allow us to use the full depth of the cabinet without having it stick out into the room more than a few inches. Genius! Well, until we realized there was an old iron sewer vent pipe right where the cabinet would go… Luckily, our plumber had planned to shatter all the old sewer pipes and replace them with new ones as part of our plumbing scope. We just made sure to have him route the new pipe in a different location clearing the way for our special cabinet.

See the giant black pipe right where we want to put the cabinet?

See the giant black pipe right where we want to put the cabinet?

Not any more! ;)

Not any more! 😉

Next, the cabinet itself had to be modified. My dad helped us by cutting off the cabinet’s legs. A delicate job that almost came off without a hitch… until one of the glass panes broke. 😦 This turned out to be a blessing in disguise because we replaced the lower panes with bead board which now allows us to use the lower storage space for toiletries that are better kept out of sight. We also had to trim the trim. Yes, we had to cut down the trim at the top of the cabinet, but just the part that would interfere with recessing it into the wall. Make sense?

Holding it up to make sure we like it :)

Holding it up to make sure we like it.  “A little higher, Dad!”  😉 😉

Trimming the trim!

The perfect vantage point for trimming the trim!

Look at that concentration!

Look at that concentration!

Lastly, my mom swooped in to put on a few coats of paint before installation. And, voila! 

Mom carefully painting both hall bathroom cabinets -- what a life saver!

Mom carefully painting both hall bathroom cabinets — what a life saver!

Finally… time to install!

The Newton Nest IMG_9625

The Newton Nest IMG_9627

Ta-daaaah!

Ta-daaaah!

Prep, prep, prep, PAINT!

Fill. Putty. Caulk. Sand. Repeat… as with the outside paint job, the prepping proved to be the hardest part! To say the least, painting an entire house from ceilings to baseboards is quite a challenging (read: sanity testing) experience. I can’t say that either of us have ever – literally – started from scratch with bare sheetrock and trim in every inch of a house, so it was eye opening to realize just how many nail holes must be filled and how many coats of paint it takes to get to the final coat. We prepped for days before we popped the lid on our first can of paint. Fortunately, our painting crew returned and we had lots of help! Matthew’s father, Wayne, carried the team (again!) through more than two weeks of painting frenzy. He was our MVP for sure!

Endless Prepping:

Putty Man Matthew

Putty Man Matthew

(With the help of his momma!)

(With the help of his momma!)

Power Sanding

Power Sanding

Sanding by hand

Hand Sanding (still powerful).

Baseboards for days...

Baseboards for days…

Caulking all the seams!

Caulking all the seams!

Finally, a paint brush... putting on the primer coat upstairs.

Finally, a paint brush… putting on the primer coat upstairs.

How many Newtons does it take to paint one corner?

How many Newtons does it take to paint one corner?

Thank goodness for good help!

Thank goodness for good help!

The Boss and The Master. ;)

The Boss and The Master. 😉

Scraping all the original doors.

Scraping all the original doors.

Bringing them back to life!

Bringing them back to life!

Bringing out the big [spray] guns!

Bringing out the big [spray] guns!

The fun part, of course, was choosing paint colors and seeing our walls come to life! We chose a pretty neutral palette with bright white trim and we think it brings a crisp-yet-calm look to the inside of our nest.

Nest Neutrals:

Our final selection!

Our final selection!

The Transformation:

IMG_8932.JPG

IMG_8935

IMG_8821

IMG_8934

IMG_8823.JPG

IMG_8937

IMG_8939

IMG_9044 copy

IMG_9072

IMG_9065 copy

IMG_9066 copy

IMG_8940.JPG

IMG_8941

Our biggest challenge in the painting project was making the formal living room suit our style… the wormy chestnut built-ins were very nice, but the heaviness of the dark wood just didn’t agree with the rest of our house. So, brace yourselves wood lovers, we painted it. (I know, I know; you’re horrified.)

A reminder of what the dark woodwork looked like... not bad, but a little dreary for our taste.

A reminder of what the dark woodwork looked like… not bad, but a little dreary for our taste.

No turning back!

No turning back!

While the whitewashed woodwork certainly brightened up the room, a new problem surfaced… despite many coats, the paint just amplified all the little holes and imperfections in the wood. It literally looked like someone had splattered black paint all over whitewashed wood. It wasn’t pretty. Enter: The Peacock Twins (my mom and her twin sister, Julie.)

Holes, holes, and more holes!

Holes, holes, and more holes! Yuck!

As with many times in my life, my mother came to the rescue! She and my Aunt Julie helped me spackle and putty every single hole. Seven hours and 30 raw finger tips later, things were looking much better and my spirits lifted. FINALLY, this disjointed room was coming together. I spent the next few evenings after work sanding away to make sure it was smooth before the final coat of paint.

Peacock twins to the rescue!

Peacock twins to the rescue!

Filled, primed and ready for paint!

Filled, primed and ready for paint!

So, here it is, the big reveal:

Ta-daaah!

Ta-daaah!

Although painting the wormy chestnut was a really tough decision, we feel like this is an improvement that brightens the room and makes it feel less disjointed.

Although painting the wormy chestnut was a really tough decision, we feel like this is an improvement that brightens the room and makes it feel less disjointed.

Despite the long days and our struggle with “to paint or not to paint” the woodwork, we are oh-so-happy with the final product! (And overjoyed to retire our brushes for a while!!!)

 

Going Gray!

Hooray — we’ve gone gray! 

No, I’m not talking about our hair color beginning to fade as a result of nearly eight months of home renovation (although, the lone long-locked Newton has noticed a few new silver strands). We have finally said goodbye to the patchwork shingles and painted the exterior of our house! We settled on a medium gray color for the cedar shakes and then called in reinforcements to help with the transformation.

The slightly more senior Mr. and Mrs. Newton (Matthew’s parents) joined the painting party and we were able to prime and paint the exterior of our little nest in two weekends’ time. Not too shabby for a bunch of amateurs—well, three amateurs and our fearless leader, Matthew’s father, Wayne, who owned his own paint contracting business for 30+ years… as the sole professional on site, he kept the rest of us from messing anything up! Painting all those shakes was no easy task and start-to-finish it took us a month of weekends if you count the prep work too, but we were strutting around with grins of accomplishment when it was all done!

We began by prepping the exterior (a lot more work than I thought!):

IMG_8527

Taping off the windows!

IMG_8440

Puttying all the little nail holes!

IMG_8453

Caulking windows!

IMG_8451

Double caulking!

IMG_8816

Triple caulking!

IMG_8466

Rooftop refreshment 😉

Here we go! Check out the power of a coat of paint:

IMG_8814

Shaking up the paint! (My staring totally helped…)

IMG_8535

Primer coat is on!

IMG_8611

Mr. Newton – head painter in charge – spraying more primer.

IMG_8609

Two Newtons and a dormer.

IMG_8567

Three Newtons and a dormer. 🙂

IMG_8542

All primed and ready for the final coat!

IMG_8626

Revving up the sprayer for the final coat!

IMG_8622

Matthew and his Momma taking a little break.

IMG_8631

Final coat of gray is on; ready to start painting all the trim along the roof!

IMG_8708

IMG_8694

IMG_8682

Trim is looking crisp and white!

IMG_8797

IMG_8787

IMG_8781

Oops! We almost forgot the garage…

IMG_8832

Goodbye, basketball goal!

IMG_8827 copy

Hello, Bat who was hiding underneath the goal. (Sorry little guy!)

IMG_8847

IMG_8843

IMG_8840

 

IMG_8921

All done!

IMG_8869

Hello, gorgeous gray! All that hard work paid off… we are really digging our Nest’s new look.

IMG_8868
IMG_8919

IMG_8916

IMG_8912

Many, many thanks to the Newtons for helping us with such a big job – we couldn’t have done it without them!!!

A few Eggs of Wisdom…

  • It’s true, many hands make light work.
  • Happy music and time with family makes even the hardest jobs more fun.
  • If you have a choice between rolling/brushing paint and using one of those handy sprayers, choose the sprayer every time! 😉

Removing a Relic

We think our Nest has lots of special features, but one of these is a certain type of wood paneling that has my dad – the master forester – seeing hearts. It’s called Wormy Chestnut… or as Richard Harper calls it, “a true relic.” Apparently, this woodland artifact is basically extinct and wormy chestnut lumber is an extremely rare find these days…and Matthew and I  [GASP]  wanted to paint it. So, in swooped the mighty mustachioed forester to rescue the Chestnut lumber in all its wormy glory from those who seek to whitewash its beauty beyond recognition!

The room we call our office was paneled floor-to-ceiling with the “good stuff,” so in lieu of covering up something so special with paint, we decided we would rather share the Wormy Chestnut with someone who really appreciates it! It took a few tries to discover a method of removing the tongue and groove boards with little damage (because they are so old, they’ve become fairly brittle), but the forester finally landed on a crude-but-effective system of prying each board away from the wall about an inch and then using a saws-all to cut through the nails holding it to the wall. Then his trusty nail puller (me) dutifully pried out the remaining nails.

What will the forester do with his loot? Well, he’s not sure yet, but Matthew and I have a feeling it will be something very special and maybe a little piece of it will make it’s way back to the Nest one day  🙂

Close-up of the grain and pattern of American Wormy Chestnut.

Close-up of the grain and pattern of American Wormy Chestnut.

In case you would like to know more about why Chestnut lumber, especially Wormy Chestnut, is so rare, here’s a little explanation from the Nest’s very first guest blogger:

So… what’s so special about the American chestnut?

Before the turn of the 20th Century, American chestnut was a dominant hardwood tree in the eastern United States occurring mostly in the Appalachians from Maine to Mississippi. Some of the largest trees reached heights almost 100 feet with diameters over 9 feet occurred right here in the Southern Appalachians which occupied 25 to 40 percent of the lower cove forests. Large crops of its sweet nut were enjoyed by humans and were a major contributor to wildlife forage.

Unfortunately, an Asian chestnut tree imported to the U.S. around 1900 carried a bark fungus commonly called the chestnut blight. The American chestnut had little resistance and the blight virtually girdles the tree killing it. By the 1930s, an estimated 3 billion trees had died.

The wood is somewhat rot resistant and many trees lay on the forest floor for years before being salvaged, hence the “wormy” effect of the lumber where insects bored throughout the tree; a.k.a. wormy chestnut.

The wood was strong, light, and was widely used for construction, furniture, and decorative trim. It has a true brown patina – not too light, not too dark… just right to warm a room – chestnut! My favorite is a room paneled with variable width boards that have been left to age to its natural brown patina.

Small shoots of American chestnut are still living throughout the Appalachians, but are soon attacked by the chestnut blight before reaching a few feet tall. Hybrids are being developed to resist the blight. One live chestnut hybrid in the Clemson area is almost 18 inches in diameter and about 60 feet tall – there is still hope!

So, what really is so special – it is a relic of a once great tree important to the forest, and… well… I just like it!

Richard Harper
Professional Forester, Retired

There you have it, folks! Straight from the Forester’s mouth.

Here are a few photos of the removal process:

A "before" picture of the Wormy Chestnut walls.

A “before” picture of the Wormy Chestnut walls.

Getting started!

Getting started!

Saws-alling with a smile!  :)

Saws-alling with a smile! 🙂

Pulling off the last few boards.

Pulling off the last few boards.

The loot!

The loot!

Here's a little Forester Flashback of Richard in his early forestry days. He's on the cover of Westvaco CFM News magazine, November 1983.

Here’s a little Forester Flashback of Richard in his early forestry days. He’s on the cover of Westvaco CFM News magazine, November 1983.

New Year, New Nest

Happy New Year, everyone! We took a little – much needed – break from our renovation adventure during the holidays, but now our attention is back on the project at hand and things are moving FAST! It’s hard to believe that within the year we will be LIVING in our home.

Just a little preview of all the things “hatching” in the next few weeks at the Nest:

  • Electrical work is underway.
  • Plumbing begins on Monday.
  • HVAC ductwork installation will also begin next week.
  • New Windows arrive January 22!
  • Repairs to the Cedar shake siding will follow window installation.
  • Masonry work/Great Room fireplace repair sometime in January/early February.
    …and SO much more!

You know we will keep you posted as these projects progress!
Now, just for fun, let’s look back on just how far we’ve come…

Before and After: Front Exterior

Before and After: Front Exterior

Kitchen before clean up and mid-demo

Kitchen before clean up and mid-demo

Kitchen now.

Kitchen now

Before and After: Master Bedroom

Before and After: Master Bedroom

Speaking of how far we’ve come…

Lauren and Matthew, circa 2001 and The Newtons, May 3, 2014.

Lauren and Matthew, circa 2001   |   The Newtons, May 3, 2014.

P.S. As we start a new year, we can’t help but reflect on the one that has just passed. 2014 will certainly go down in history as a big one for us…after a dozen years of dating, we finally tied the knot; Lauren took a new job in Greenville; and, of course, the newly-minted Newtons took on one heck of a house project!

So many of you who follow us on this little blog have given us invaluable words of wisdom, shown us love, cheered us on, and even gotten your hands dirty working alongside us. We are truly grateful for all of you. Thank you and cheers to a brand new year!